Accurate measurement of battery state-of-charge
From smartphones to smartwatches, fitness trackers, and gaming consoles, the mobile devices we use each day have become so pervasive that you could say we live in a battery-powered world. Indeed, the global market for portable, battery-powered products is anticipated to grow to US$865.4 billion by 2020, according to Global Industry Analysts, Inc. It’s no wonder, then, that battery fuel gauge technology has become so essential. We all appreciate an accurate reading of how much battery life is left in our electronic gadgets until the next recharging cycle.
Figure 1 Smartphones are just one of many portable, battery-powered devices where accurate battery state-of-charge is essential for customer satisfaction.
Because temperature and load have such an effect on voltage, fuel gauging hasn’t typically been easy to do. Various scenarios are possible. For example, voltage could vary substantially because of load and temperature. Voltage changes could have too much delay. Or, open-circuit voltage (OCV) relaxation could have too much delay. Let’s take a closer look at different fuel gauging methodologies and their strengths and weaknesses.
Why fuel gauging has been so time-consuming
Traditional fuel gauging has involved a lengthy process. A power or battery specialist would work with a fuel gauge vendor to find a suitable model for their battery. Since the gauges are dependent on the battery type involved, the battery models would generally have to be tailored to each battery. Battery characterization under various load and temperature conditions would be required. The power/battery specialist would either use specialist test equipment at their own site, or send their battery to the vendor for characterization. Once these steps were done, the specialist could then take the resulting custom battery model, plug it into the fuel gauge, conduct their evaluation, and finalize their design.
One fuel gauging method involves simple, or immediate, voltage. This method provides the greatest accuracy after the battery has been allowed to rest in an open-circuit state for at least two hours. Because of this, the simple voltage method is impractical to implement. Also, examining simple voltage alone isn’t a great indication of battery SOC because of the impact of cell materials and temperature on voltage.
Coulomb counting is another fuel gauging method to consider, particularly when short-term accuracy is important, as small errors have negligible impact. This approach measures the current going in and out of the battery at all times, accumulating the results. The estimated charge used by a device is subtracted from the total charge that can be held by the battery, indicating how much charge remains overall. Coulomb counting is, however, disadvantageous over longer periods of time because the counters do suffer from offset accumulation drift. As an example, consider a battery with capacity of 1000mAhr. With intermittent loads of 50mA for some time, followed by long periods of standby with nearly zero current, the battery gets drained over a period of four days.
Suppose the coulomb counter has a 1mA error (10µV offset in current measurement ADC and using a 10mΩ sense resistor). Extrapolated over the four days, that error becomes 96mAhr. For a 1000mA battery, this error is equivalent to almost 10% of the battery capacity that may be over or underestimated. As you can see, a seemingly small error over a long period of time can actually create a large accuracy discrepancy. The device could shut down prematurely or crash abruptly as a result. For coulomb counting to be effective, the technique calls for constant corrections, typically when the battery is full or in an idle state, or when it reaches an empty state.
Coulomb counting comes with other challenges. Since the counter doesn’t know what empty and full are, the battery must cycle between empty and full for the system to know the battery’s capacity. Realistically, users rarely want to wait for the battery to be completely empty before recharging, so the empty-to-full or full-to-empty cycles happen infrequently.
Continue reading on Embedded's sister site, EDN: "Product how-to: Novel technology to accurately gauge battery state-of-charge."