High-end digital frame comes from relatively simple design
One of the fun parts about doing Tear Downs is getting to try the products out before taking them apart. This particular product, the Kodak EasyShare M1020 10-in. digital frame didn't have any particular appeal to me, so it sat on my shelf unopened for a while.
One day, while preparing for a party for one of my kids (my son's high school graduation), I noticed the frame sitting there, and I decided to put it to use. I loaded up a bunch of pictures of my son, and I was astounded at the quality of the display. One of the frame's key features is the touch capability. It uses an intuitive menu that sits around the LCD's edge. That menu disappears when displaying the photos.
I had bought a smaller, albeit less expensive digital frame a few years ago, and was frankly underwhelmed by its performance. So it doesn't get used too often. But the quality of the Kodak frame really amazed me. From that point until it underwent the hammer and screwdriver treatment, it got lots of use.
Once apart, it was evident that the electronics in the frame were held to a minimum. In fact, there were only two key components--the Amlogic AML6213D microprocessor and the Cypress Semiconductor CY8C20434. Other ICs include two memory chips: an EtronTech EM639165TS SDRAM that's used in conjunction with the Amlogic part and a Hynix HY27UF081G2A SLC NAND chip that's used for storing code store and images.
The frame comes with 128 Mbytes of built-in storage and an SD Card interface. The internal memory is programmed via USB, but it's much easier to stick your photos onto an SD Card and plug the card into the frame.
In the design, the AML6213 is essentially the workhorse part, as it handles the memory card interface, the image file translation, the image formatting for display, and the driving of the LCD. The main function that the CapSense part is used for is to detect the capacitance on the LCD to identify whether a finger is present. A second function is that it acts as an interface to the main processor, which occurs over an I2C bus.
This frame was built in China by an original design manufacturer (ODM), one of a few employed by Kodak. Multiple frames with varying size displays are in development. On this model, Cypress worked with its local distributor, Future Electronics, on the pcb design and the schematics. Cypress also developed tests and tools for the ODM. Finally, Cypress helped Kodak qualify the manufacturing process.
Regardless of the size of the display, a variation of the CapSense part can still be used. The only difference is that there are more I/O pins when the larger display is used. For example, the 10-in. display uses a CapSense with 15 I/O pins, while the 8-in. display requires a CapSense with just 12 I/O pins.
"When working with Kodak, they require us to be extra careful about the firmware footprint," says Ken Xu, a Cypress field applications engineer based in Shenzhen, China, who was deeply involved in the design. "To minimize the firmware size, we used a software filter. It also helped us to get the best reliability when identifying the presence of the finger. The CapSense also lightens the workload on the host processor by identifying which inputs are being deployed."