Symtavision adds Ethernet timing analysis to SymTA/S
Symtavision has added Ethernet timing analysis to its SymTA/S tool for the design and verification of embedded real-time systems. The new Ethernet timing analysis targets the automotive market and integrates with the existing in-vehicle network timing analyses for CAN and FlexRay as well as with scheduling analysis for AUTOSAR-based ECUs.
The SymTA/S Ethernet analysis capability focuses on timing design and verification for both standard IP Ethernet (Layer 3) and Audio Video Bridging (AVB). The SymTA/S Ethernet model covers entire Ethernet networks including ECUs, switches, ports, messages, PDUs and links which can be directly combined with other bus systems like FlexRay and CAN, in addition to white box or black box gateways. Furthermore, the model supports the co-existence of internal ECU scheduling and Ethernet communication, including any triggering and synchronization requirements. The model can also be scripted for easy tool chain integration and model transformation of existing Ethernet communication matrices.
The SymTA/S Ethernet analysis capability covers different communication priorities, MTU sizes, scheduling strategies, and transmission rates as individual rates per port as well as automatic end-to-end hop resolution, static routes, traffic classes, and single cast, broadcast and multicast communication, including multiple hops over switches for star or other topologies.
Statistical metrics are provided for load and load-over-time of each port or on a switch as well as buffer fill levels as absolute or as over-time values for each port and switch. In addition, response times are provided for each Ethernet message and data communication paths can be observed for different end-to-end scenarios. Each result can be validated against constraints and the timing can be debugged individually through Gantt chart visualization, including point-of-interest functions such as deadline violations.
Currently no items