Even the most pessimistic estimates tell us that there are now 10s of billions of internet of things (IoT) devices connected to cloud services today. However, growth has been lower than forecast just a few years ago, with security concerns often cited as the main bottlenecks to IoT deployment, particularly in the industrial sector.
IoT devices, or endpoints, are often described as being on the ‘edge’ of a network.
In order to connect them securely to one or more applications hosted on a server, either in the cloud or on-premises, two fundamental conditions must exist:
- The identities of the senders and recipients of data must be established beyond doubt. So, as a starting point, every microcontroller or application-specific integrated circuit (ASIC), that drives an IoT device must have a unique, immutable, and unforgeable identity. For the sake of simplicity, we’ll just use the examples of microcontrollers (MCUs) in this article, because these are used in the vast majority of applications.
- The messages must be sent in such a way that only the intended recipients can interpret them, and they must not be readable or corruptible by any device that attempts to interfere with the data in transit. This is achieved using cryptography, which involves an exchange of data in the form of cryptographic keys (keys unlock the secrets with IoT data and messages) and certificates of authentication.
Few embedded design engineers are cryptographic experts and cryptography is a complex subject with a language of its own. It follows that if security is not to be a barrier to the adoption of IoT in industrial applications, there must be a straightforward way to ensure not only that IoT devices are secure but that there is a straightforward way to connect them to server-based applications securely. There’s also a need to manage security throughout the lifetime of the devices.
This article describes the building blocks of a secure IoT infrastructure and the process that needs to be followed to create one. While it references Crypto Quantique’s QDID hardware IP integrated into MCUs and QuarkLink cloud-based security platform to illustrate the process, the fundamental steps are similar for other roots of trust (RoTs) and platforms.
An overview of the process is shown below.
Establishing a root-of-trust (RoT) at IoT endpoints
A root-of-trust, or RoT, consists of a device’s identity and its cryptographic keys. A unique RoT is the most fundamental building block for a secure IoT network. Identities and keys are based on random numbers. The more random the numbers, the greater the security because the harder they are for hackers to determine.
The most common way to create RoTs for MCUs is to use a random number generator (RNG), and then place the identities and keys into the devices using a process of key injection. The keys are then stored in the devices’ non-volatile memory. There are some disadvantages to this approach. The process is expensive, it means involving a third-party to do the key injection, which could compromise security, and storing the keys makes them vulnerable to theft or unintended leakage. However, many MCUs used in industrial IoT devices have RoTs created in this way.
Another approach is where the IP is embedded into semiconductor chips during manufacture, without requiring changes to the standard CMOS process flow – an approach enabled by the QDID silicon hardware IP. Firmware is then injected into each microcontroller using a standard programmer. The combination of IP and firmware enables multiple random identities and related keys to be created on-demand throughout the device lifecycle. No key injection is needed, nor do the keys need to be stored, minimizing vulnerability to attack.
Quantum tunneling as a means to enabling secure identities
Tiny variations in the thickness of the oxide layer on a silicon wafer occur during the semiconductor manufacturing process, and these quantum effects can be observed across the silicon barrier. The variations in the thickness of the oxide layer are themselves random but when combined with the probabilistic nature of quantum tunneling – a quantum mechanics phenomenon – random numbers with exceptionally high entropy, or ‘randomness’ are produced. High entropy underpins high security.
On this basis, since a secure IoT network needs to establish a secure RoT by creating identities and cryptographic keys that do not need to be injected or stored but can instead be created on-demand in silicon throughout the IoT device lifecycle, this is far better for security.
Let’s now take a look at the end-to-end process for creating RoTs and connecting devices to the cloud in a little more detail, including where each step takes place.
During semiconductor manufacture
The QDID IP bakes a 64 x 64-bit array into each silicon chip and the bits are used to create 8 x 128-bit random numbers or ‘seeds’, one of which is designated as the enrollment seed. The collection of bits gives the MCU its unique identity. However, it does not yet have any way of proving that identity.
At a programming house or at the end user’s facility – using a standard programmer
QDID firmware is injected into each MCU using a standard, mass programming interface such as JTAG, SWD or UART. To reiterate, we’re not injecting identities or keys here, just a firmware image. When executed, the firmware uses the semiconductor manufacturer’s peripherals within the MCU to generate a pair of asymmetric cryptographic keys – one public and one private – using one of the seeds produced by QDID. The public key is then used to create a 256-bit encrypted number called a ‘hash’. The irreversible hash then registers the MCU with the QuarkLink IoT security platform, which is hosted on a secure server.
At a programming house or at the end user’s facility – using QuarkLink
The firmware that was earlier injected into the MCU enables communications with QuarkLink. Then via a simple select and click menu interface, the user performs the following steps to provision, onboard and manage the IoT endpoint devices into which the MCUs have been installed. The IoT devices may be HVAC units, cameras, asset tracking modules, or any types of sensor or actuator.
The first requirement is to prove the identity of the devices that need to be connected to the software platform. This is a six-step process and although complicated things are happening in the background, it’s all handled via a few drop-down menus and keyboard strokes when using QuarkLink. No knowledge of cryptography is needed. Here’s what happens:
- A pre-defined server policy is selected in the dropdown menu. The platform currently supports AWS, Azure and Mosquito but is essentially server-agnostic and can be easily adapted for other server platforms.
- The identities of the MCUs within the IoT devices are imported as a batch to check that their enrolment keys have been registered. The platform will only engage in further communications with the devices if registration is confirmed.
- QuarkLink sets up a secure communications channel using the industry-standard Transport Layer Security (TLS) protocol. Part of this protocol requires that a shared secret key – the “session key” – is generated. (This part of the process is based on the Diffie-Hellman key exchange method, details of which have been published widely elsewhere). The session key is symmetric and is used to transfer encrypted data between the IoT device and QuarkLink. Symmetric keys, which are typically 128-bit or 256-bit, are used because encryption and decryption are faster.
- The platform then asks the devices to prove their identity through the secure TLS channel.
- QuarkLink verifies that the hash of the public key is the same as the one originally sent to it to register the MCU within the device, as described earlier.
- For each IoT device, the platform generates a random number called a “challenge” and sends it to the device. The device encrypts this number and returns the encrypted information back to the platform.
- The platform decrypts the information and if it reveals the “challenge”, the device has proven its identity.
With the IoT devices now onboarded, secure connections having been established, data from the devices can be communicated to the applications running on the server. All this has been achieved within a few minutes with just a few keystrokes guided by the platform’s intuitive user interface.
This software platform also facilitates the management of security throughout the lifetime of IoT devices. It manages device certificates and security policies, ensuring functional integrity and helping prevent cyberattacks. It also facilitates firmware signing and encryption for secure over-the-air (OTA) updates and handles key and certificate renewal. The latter may be needed after a system fault or other interruption. If devices should be compromised, they are easily removed from the network and re-onboarding can be done if the device is transferred to a new owner.
The QuarkLink platform is described here working with the QDID root-of-trust, but it is also part of the Renesas RA Series secure microcontroller ecosystem and it supports Silex Insight’s eSecure RoT module.
Using a software platform like QuarkLink can simplifies the process of device security deployment significantly as most users can become competent within the system withn an hour. This is in contrast to other systems – for example, the most recent guide to security in the AWS cloud runs to 27 chapters and 365 pages.
Complexity is the barrier to security
There are many reasons for the slow adoption of security in the IoT, but the primary reason is complexity. It may be understood that cryptographic techniques are necessary but implementing them in real products is difficult.
A connected device needs to be able to utilize a PKI security mechanism to guarantee that online communications are authentic and private. The owner of the connected device needs to appreciate the complexities of digital certificates that are embedded within it for identification, authentication and TLS secure communication. These certificates have to be signed by certificate authorities (CA) that certify the ownership of the public keys included in them.
Automation is the only viable solution, reducing this complexity to a simple user interface that embedded engineers and IoT network operators can learn quickly and utilize with confidence.
Chris Jones is Crypto Quantique’s IoT security specialist. Following a 28-year career in project management and field applications engineering, Chris spent two years as a senior application engineer at Secure ThingZ in Cambridge, UK, working in IoT security. He joined Crypto Quantique in May 2020. Chris holds a BSc in electrical and electronic engineering from the University of Coventry, UK.
- Facilitating IoT provisioning at scale
- IoT security hinges on effective device enrollment with public key infrastructure
- Standards are critical for secure connectivity in industrial IoT
- Security-as-a-service embedded software protects IoT data in motion
- Cloud to chip approach is key to driving adoption of IoT security
- Protection suite adds secure edge and cloud integration for IoT devices
- IoT device security: A path to standardization