Agilent expands PCIe digitizer portfolio - Embedded.com

Agilent expands PCIe digitizer portfolio

Agilent Technologies Inc. has developed several options for its U1084A PCI Express (PCIe) embedded ADC cards.
 
The family is now available with three separate base versions. The top-of-the-line U1084A-001 features sampling rates up to 4 GS/s and a fully featured front-end with 1.5 GHz bandwidth. It’s now complemented by two new versions that offer up to 2 GS/s (-002) and 1 GS/s (-003) sampling rates, respectively.

All versions are dual-channel and have an interleaved single-channel mode for maximum sampling-rate performance. In addition, the units incorporate advanced triggering capabilities, including a 15 ps trigger time interpolator (TTI) for accurate timing measurements.
 
The U1084A architecture can perform specific post-processing tasks, which are uploaded into the FPGA under program control.
 
The standard digitizer firmware (-DGT) enables the digitized data to be stored in the on-board memory of up to 512 MB. The option also provides smart memory management with segmentation mode and trigger time-stamp functionality.
 
In addition to the standard digitizer functionality, the optional ping-pong memory buffer architecture (-DGS) allows hundreds of thousands of analog signals per second to be simultaneously acquired and transferred over the lightening fast PCIe bus.
 
The signal peak detection firmware (-TDC) histograms successive acquisitions. The resulting histogram bins contain peak counts or summed peak amplitudes. Up to 60 Mpeaks/s can be accumulated, while having a trigger jitter of just 250 ps.
 
Alternatively, a real-time sampling and averaging firmware (-AVG) can average from 1 to 16 million waveforms with trigger rates up to 500 kHz. Signal averaging can be used to reduce random noise effects, improving the signal-to-noise ratio as well as increasing overall resolution and dynamic range.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.