Agilent expands probe range - Embedded.com

Agilent expands probe range

As well as introducing a Tektronix-to-Agilent probe adapter, Agilent has added several probes to its portfolio.

The N2795A 1-GHz and N2796A 2-GHz single-ended active probes feature 1-Mohm input impedance and 1-pF input capacitance for low signal loading. The probes’ built-in headlight helps engineers view small components on their circuits under test. These probes are directly powered by the oscilloscope’s AutoProbe interface and require no external power supply.
 
The N2887A 36-channel Pro and N2888A 18-channel half-channel InfiniiMax soft touch probe heads connect Agilent soft-touch connectorless probes to the input connectors of the Agilent InfiniiMax I and II Series probe amplifiers. The probe heads enable engineers to probe high-density signals with up to 4 GHz of bandwidth. The probes also allow engineers to make the multichannel measurements commonly required in DDR memory testing and in other high-speed applications where space is tight.
 
The N2893A is a 100-MHz, 15-A AC/DC current probe with AutoProbe interface for InfiniiVision and Infiniium oscilloscopes. The new current probe features auto degauss (demagnetization) and auto calibration to remove residual magnetism and unwanted DC offset in the probe. This feature helps engineers make more accurate low-level DC current measurements. The N2893A current probe also excels in accurately capturing transient or steady-state currents, a must for testing and debugging today’s power electronic devices.

The Agilent N2795A and N2796A active probes; the N2744A T2A probe interface adapter; the N2887A and N2888A InfiniiMax soft-touch probe heads; and the N2893A current probe are available now.

Information about Agilent’s probes and adapters is available here .

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.