Advertisement

Advanced RF devices meeting emerging performance demands

July 10, 2019

Maurizio Di Paolo Emilio-July 10, 2019

Network traffic is growing at an exponential rate due to the growing popularity of mobile computing devices. As a result, there are continuous rollouts around the world of next-generation wireless standards like 5G. The implementation of higher-level digital solutions with a higher sampling rate is becoming increasingly widespread as digitization becomes cheaper and less power-hungry.

Chip suppliers, therefore, have a huge opportunity, especially radio-frequency (RF) semiconductor manufacturers. Some analysts estimate a 12% compound annual growth rate (CAGR) for base stations and a 5% CAGR for telecommunications backhaul over the next three years. Defense applications also offer excellent opportunities for RF power devices thanks to the industry’s tendency to replace old designs with solid-state devices that exploit gallium arsenide (GaAs) and gallium nitride (GaN) technologies.

MACOM, for example, expects that there will be a 32× to 64× increase in the number of power amplifiers required, which, in turn, could multiply the economic value of this market by more than 3× during a five-year cycle of investment in 5G infrastructure and, according to forecasts, lower the cost per amplifier by 10× to 20×.

5G wireless mobile
The 5th generation (5G) wireless mobile network will run from 24 GHz to 95 GHz and will be able to offer ultra-low latency with a secure and reliable connection. It promises high-speed wireless connections for applications like high-definition 4K/8K streaming TV. This means enormous efforts and pressures for RF and microwave engineers to rapidly design and build 5G and internet of things (IoT) products to compete for a share of the market.

Compared to the previous 3G and 4G LTE implementations, 5G introduces numerous architectural complexities mainly due to the enormous multiple-input multiple-output (MIMO) antenna configurations.

One of the most important tests on millimeter-wave (mmWave) devices is propagation loss. Currently, engineers verify the transceiver’s performance by conducting a series of tests, such as error vector magnitude (EVM), occupied bandwidth (OBW), and spectral emission mask (SEM). To test the antennas, which are integrated on the board or inside the housing, over-the-air (OTA) measurements are used.

Two of the biggest challenges are electromagnetic interference (EMI) and electromagnetic compatibility (EMI), requiring techniques that avoid electromagnetic effects but also total device and equipment failures in mission-critical operations in which heat is a critical design factor.

Beamforming is one of the techniques that can help support the requirements of high speed, low latency, and reliability of the 5G network. Beamforming refers to the most efficient way to create a path between the transmission antenna and the end user, reducing interference and power losses caused by possible obstacles.

It is essential to improve the available output power and energy efficiency of the network infrastructure for these innovative frequency bands by using advanced GaN technology.

RF amplifiers
5G radio equipment must operate in traditional cellular bands and other microwave and mmWave bands, manage complex modulation schemes, demonstrate low energy consumption, and implement new technologies. The base stations are the intersections of cellular networks; they record the transmitted data of a radio cell and transmit them.

To ensure a smooth flow of data across frequency bands in the mmWave range in the future, the output power of base stations must be improved by keeping the energy consumption low, which also reduces the cost of power.

Electronic devices and GaN-based systems are significantly more energy-efficient than conventional silicon (Si). GaN is a material that ensures a high bandgap of 3.4 eV compared with 1.12 eV achieved by an equivalent silicon-based device. A wide bandgap allows the device to support electric fields much higher than the silicon counterpart (of the same size) before a break occurs and, consequently, the device becomes unusable.

The main component of wireless communication systems is the power amplifier in the transmitter. Advanced digital modulation techniques used in high-speed networks require a high-efficiency amplifier to avoid intermodulation distortions that could degrade the signal quality.

There are a variety of amplifier architectures used in the industry to achieve higher efficiency. As an example, the Doherty amplifier architecture guarantees extremely high power efficiency with input signals that have high average peak ratios (high peak-to-average, PAR, or PAPR). Doherty amplifiers are often used in situations when a variable amplitude signal must be linearly amplified.

Another technique called “outphasing” is used by many companies such as Fujitsu and NXP to increase the efficiency of the amplifier. It combines two non-linear RF amplifiers with two different ones that drive signals with different phases.

The design techniques for correct selection of the passive components allow designers to optimize the system for a determined output amplitude, obtaining an efficiency improvement.

Another design factor for RF amplifier designers is envelope tracking, in which the voltage applied to the power amplifier is continuously adjusted to make sure it is operating at maximum power.

Unlike a typical power amplifier in which a DC/DC converter provides a fixed voltage, an envelope-tracking system modulates the connection of the power supply to the amplifier with a high-bandwidth and low-noise waveform, synchronized in real time with the signal envelope. Envelope tracking is an RF power management technology that can improve system efficiency at high levels with signals at any LTE bandwidth ( Fig. 1 ).

Fig. 1: Block diagram of an envelope tracking amplifier.

 

With the arrival of GaAs and GaN devices with reduced gate lengths, coupled with new design techniques, new devices are now available that can operate safely up to millimeter wavelengths, opening up new applications that were difficult to contemplate up to 10 years ago ( Fig. 2 ).

One example is the MACOM MAAP-011233, a 4-W, four-stage power amplifier assembled in a lead-free, 32-mm AQFN plastic container. This power amplifier operates from 28.5 GHz to 31 GHz and provides 26 dB of linear gain, 4-W saturated output power, and 27.5% efficiency, with 6-V polarization. This product is manufactured using a pHEMT GaAs process that offers full passivation for higher reliability.

Fig. 2: Application schematic of the MAAP-011233. (Image: MACOM)

 

>> Continue reading the complete article originally published on our sister site, Electronic Products: "RF power devices advance for wireless mobile designs."

Loading comments...

Most Commented