Integrated devices simplify power management in mobile platforms

May 20, 2019

Maurizio Di Paolo Emilio-May 20, 2019

Portable devices such as mobile phones and tablets require power management techniques to meet the increasingly challenging performance requirements. Consumers are using their smartphones in new ways: They want to display high-definition GPS videos and maps; make two-way video calls; play more engaging games; and stream music. System-on-chip (SoC) projects for this type of application must also comply with stringent heat dissipation targets while meeting the long battery life requirements.

Third-generation “smart” mobile phones combine the traditional mobile phone with functions like personal data assistants (PDAs), digital cameras (DSCs), and music players (MP3s). The rechargeable lithium-ion (Li-ion) battery is the power source for mobile electronics. Its high energy density guarantees greater power in size and weight than other types of batteries. Furthermore, its operating voltage makes it possible to obtain a long life and high conversion efficiency for DC/DC solutions.

Estimating the energy consumption of a mobile device is a fundamental element of the design. The aim is to design the device to minimize its energy consumption. Individual components such as the oscillator, CPU, I/O ports, and analog peripherals must be considered as part of the calculation. Effective energy management presents an increasingly complex range of design challenges. Low battery life contributes to customer dissatisfaction.

The battery
To meet these design goals, the design of the power management subsystem starts with the battery. Factors such as recharge cycles, aging, and temperature can degrade the performance of the lithium-ion battery over time. Proper management and control of a rechargeable battery are essential to optimize battery life.

Battery management consists of three parts: charge monitoring, protection, and control. Battery monitoring and protection ICs are usually supplied with the battery itself. However, charge control is part of the portable device. The charge control devices have evolved significantly over time, implementing lower minimum gate lengths for high-density, high-speed digital circuits but also higher-voltage–capable devices for more analog and power applications.

The linear control topology works well in applications with low-power battery packs that are charged to less than 1 A. However, the switch-mode topology is more suitable for large battery packs that require charging speeds of 1 A or higher. Switching-mode topology is more efficient and minimizes heat generation during charging but can produce electromagnetic interference (EMI) if it is not packaged correctly.


Fig. 1: Texas Instruments’ bq24259 for battery charge management. (Image: Texas Instruments)

The bq24259 from Texas Instruments is a switch-mode battery-charge management and system-power-path management device for a one-cell Li-ion and Li-polymer battery ( Fig. 1 ). The IC automatically charges the battery in three phases: pre-conditioning, constant current, and constant voltage.

Designers of mobile and portable Li-ion devices can improve performance by extending battery life and providing information on the state of charge (SOC) of the battery using charge level indicators with the MAX17262 single-cell and MAX17263 single-/multiple-cell integrated circuits from Maxim Integrated. The MAX17262 and MAX17263 devices combine the traditional coulomb counting with the new ModelGauge m5 EZ algorithm for the high precision SOC of the battery without requiring the characterization of the battery itself ( Fig. 2 ).


Fig. 2: Simple fuel-gauge circuit diagram. (Image: Maxim Integrated)

Power management for multicore chips
The amount of computation continues to increase in SoC projects to add more functionality via hardware accelerators that perform machine-vision and other deep-learning algorithms. At the same time, however, these powerful multicore chips require solutions that further improve energy efficiency and create more flexible power supply sequences.

The need for lower energy consumption and the ever-increasing advent of mobile devices have directed microelectronics toward increasingly ultra-low-power solutions exploiting environmental energy sources such as kinetics, solar, thermal, and radio frequency (RF). Getting the most out of these sources is not easy. Detection, control, and conditioning are critical factors in the design and can determine the overall efficiency of the energy-harvesting system.

The challenge of a power management system is to provide constant voltage output with maximum efficiency. With the recent advances in microelectronics, low-power systems can manage energy harvesting to meet the low power consumption of the microwatts and nanowatts that involve today’s integrated circuits in different operating situations.

The importance of optimizing energy performance becomes more critical and technically more difficult. Power management integrated circuits (PMICs) are highly programmable, allowing them to support voltage sizing and power supply sequencing required by single- or multicore application processors, as well as all smartphone subsystems, such as the network and stack connectivity (3G, 4G LTE, Wi-Fi, Bluetooth, and NFC), displays, megapixel cameras, and more.

>> Continue reading the complete article originally published on our sister site, Electronic Products: "Power management ICs deliver design flexibility to mobile platforms."

Loading comments...