HARDWARE TOOLS - IO-Link reference design is industry's smallest - Embedded.com

HARDWARE TOOLS – IO-Link reference design is industry’s smallest

San Jose, Calif. – Atmel Corporation, HMT Microelectronic, and MESCO Engineering have partnered to combine Atmel's AVR microcontrollers, HMT's PHY IC and MESCO's IO-Link stack to create the TM96. 0-A IO-Link reference design, which they claim is the industry's smallest.

IO-Link is the industrial control communication standard that will introduce several benefits for the end user, including easier cabling, remote diagnostics and configuration. This new solution provides designers overall savings in bill-of-material and board space.

For many sensor designers, the physical size constraint is the key factor for integrating the IO-Link capability. Atmel, HMT, and MESCO Engineering have focused on saving board space throughout the development and can now offer the TM96. 0 GENIE Explorer Variant A reference design. Measuring 6 x 20 mm, this is the smallest reference design available in the industry today.

The TM96. 0-A reference design acts as an IO-Link device and is equipped with a push button, 2 LEDs and a potentiometer to allow developers to add stimuli to the system. The reference design runs the MESCO IO-Link stack on an Atmel ATtiny88 microcontroller and communicates on the IO-Link cable using HMT's HMT7742 PHY IC.

The implementation used in the reference design does not require external protection to sustain reverse polarity or to comply to the EMC surge protection defined in the IEC 60255-5 standard. Atmel's AVR microcontrollers and HMT's PHY IC are available in small packages to allow implementations in size-constrained environments.

All AVR microcontrollers, including the picoPower, high-performance XMEGA featuring 12-bit ADC and DAC, can be used to run the MESCO stack and connect to the HMT7742 PHY IC. This makes the solution scalable and allows developers to find the right fit for their application and reduce their bill of material.

The MESCO IO-Link device stack firmware provides the developer of an IO-Link device full access to all features and services defined in the IO-Link Specification version 1. 0. The firmware also supports features like Service PDU, Interleave Mode and diagnostics handling with event details.

Using a modular design which is optimized for the AVR architecture, the library is scalable and allows a quick implementation of customer specific commands.

The TM96. 0-A reference design comes with a demo application of the MESCO IO-Link device stack firmware. For IO-Link product development, the TM96. 0-B evaluation and debugging board is available. It is equipped with all the required connectors and provided with the MESCO firmware library. Optionally the customer can purchase the related source code.

A developer using this solution benefits from an IO-Link tested, proven, interoperable and maintained device stack firmware, reducing significantly the time to market and associated development risks. Samples of the TM96. 0-A demonstrator and the TM96. 0-B development kit are available now.

Visit www. hmt. ch/genie-explorer for further information.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.