More about Google's DIY Modular Smartphone - Embedded.com

More about Google’s DIY Modular Smartphone

SAN FRANCISCO — Google's Ara modular smartphone concept faces plenty of challenges in its ambitious effort to create the equivalent of an apps store for hardware, according to a talk here by a Google executive.

The Ara phones will require significant innovations in antennas, interconnects, and mechanical structures — and a new layer of Android code. Most importantly, Google needs to enable and inspire a new community to start creating compelling modules that let users do things they can't do with today's smartphones.

“If it's just today's phone and the pieces come off, it will be a big yawn,” said Kaigham Gabriel, deputy director of the Google R&D lab working on Ara, speaking at Semicon West.

To enable new modules, Google will have at least two contractors make a blank module platform it designed currently based on an FPGA. A follow-on version with an ASIC being developed by Toshiba will give engineers twice as much space to pack in their innovations.

To prime the pump, Google recently announced a $100,000 challenge for the best module design. It showed a working prototype phone that booted Android two weeks ago.

Taiwan ODM Quanta is working on the basic skeletons that will carry the modules. The 9mm thick base includes a flexible circuit board and 400 mAh battery for system functions.

In terms of its core technical challenges, Google and partners are working on new kinds of antenna designs integrated into the module packages. They require new antenna modeling tools and deposition techniques.

Designers are still experimenting with different capacitive, inductive and hybrid contactless interfaces to link the modules and skeletons. The approach keeps the interconnects thin while supporting data rates in tens of GHz. On the electrical level, Google chose the MIPI M-Phy and Unipro interfaces because they are widely used in smartphones and do not use the master/slave approach of alternatives like USB and PCI Express.

Mechanically, Ara is using electro-magnets to hold modules with a 30 Newton force when turned on. Turned off, they exert a 5 Newton force, enough not to fall off but still be easily removed by users. The technology is well known on factory floors where it is used to lift cars but less well used in miniature consumer forms.

Finally, adding a new driver communications layer to Android is no simple feat given the breadth and pace of Android development. But the dynamic software interface is needed to make the OS one that can deal with hardware components coming and going.

To see more of what the Google Ara smartphone design is all about and to leave a comment, go to “Game changing Promises.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.