Many features come together to make a useful wearable device. Form factor, design, and energy efficiency are essential to realizing devices that not only do their job correctly but are also comfortable, attractive, and easy to use, offering new ways to improve our productivity, health, and lifestyle. The goal of designers of always-on wearable and Internet of things (IoT) devices is to extend battery runtime while shrinking the form factor, which can be accomplished with tiny, highly integrated power management ICs (PMICs).
Optical-sensing accuracy in wearables is also a big concern, which is impacted by a variety of technical factors, including the choice of PMIC. Ultra-low-power PMICs integrate circuit architecture that optimizes the sensitivity of optical measurements for health applications. The new PMICs enable the highest sensitivity for optical sensing in wrist-worn form factors for more accurate vital-sign measurements, as an example.
In recent years, the number of wearable sensors in circulation has grown exponentially. This is due to various factors ranging from the increase in health-care costs to the growth of “health fanatics” — a lifestyle that is characterized by an obsession with health. Moreover, thanks to the internet, consumers now have easy and almost unlimited access to information concerning their health. The design of reliable solutions in the wearable medical field requires reliable electronics. The high functionality required by devices such as hearables and smartwatches involves a higher consumption of energy.
The continuing trend toward smaller and thinner packages, in turn, requires a new generation of integrated power management circuits that facilitate charging. Conventional batteries that fit wearable technology, such as lithium-ion (Li-ion) cells, may be fine for sensors and other wearable devices with low power demand, but they struggle to keep up with the highest-performing wearable requirements such as speech and gesture recognition, monitoring, and sensing.
The printed-circuit-board (PCB) design for wearable devices requires much consideration both for the choice of materials and a correct layout in compliance with electromagnetic compatibility requirements. Wearable PCBs require much closer impedance control, which is an essential element of the layout resulting in cleaner signal propagation.
A typical wearable device architecture includes a system-on-chip (SoC), memory, display, sensors, and power management blocks. A typical power management system includes a charger, various buck converters, and low-dropout regulators (LDOs) for Bluetooth/Wi-Fi connection. In a smartwatch, for example, design challenges are essentially dissipation management and battery sizing. All of this involves an appropriate selection of PMIC devices.
Most systems require a charger and various outputs regulated for common circuit functions — for example, 3.3-V and 1.2-V supply buses for the microcontroller and communication protocols.
A highly configurable, integrated linear loader in the PMIC supports a wide range of Li-ion batteries and includes battery temperature monitoring for added safety. A bidirectional I 2 C interface allows designers to configure and monitor device status. The architecture of a PMIC also includes a controller with supervision functionality.
Power supply systems with buck and boost converters are the most efficient. Low-voltage, low-dropout linear regulators are preferred for low-noise devices, but energy efficiency can be a critical factor. An optimal supply system is represented by the exclusive use of switching power supplies. The drawback of this approach is that each switch requires an inductor, thus increasing the PCB space and the size of wearable devices.
As a result, the circuit requires a single power management solution that integrates various power buses using a single-input, multiple-output (SIMO) architecture. By providing multiple outputs, the SIMO approach, together with the low standby current of the controller, extends the battery life of the wearable design. Regulators provide energy with minimal losses, and the architecture eliminates some duplicate components while saving on the bill of materials.
One example is Maxim Integrated’s MAX20310, an integrated power management circuit that combines two SIMO buck-boost outputs with two LDOs and other power management features such as a sequencing controller. The linear regulators can also function as power switches that can disconnect the inactive load of the system peripherals ( Fig. 1 ) to improve the efficiency.
Fig 1: A block diagram of the MAX20310. (Image: Maxim Integrated)