Two 50-Mbps RS-485/RS-422 transceivers, the ADM3065E and ADM3066E from Analog Devices, provide ±12 kV ESD protection in accordance with IEC61000-4-2 Level 4 requirements. Intended for use in harsh environments commonly found in industrial automation, motor control, military, and avionics applications, the devices operate over a temperature range of -40°C to +125°C and allow the connection of up to 128 nodes on the bus.
The ADM306xE series has a VCC operating voltage range of 3.0 V to 5.5 V, while the ADM3066E integrates a VIO logic supply that enables operation down to 1.62 V and allows direct connection to low-power processors and FPGAs that operate at 1.8 V. With full receiver short-circuit, open-circuit, and bus-idle failsafe, applications using the ADM306xE are immune to common real-world faults, such as incorrect wiring.
You must verify your email address before signing in. Check your email for your verification email, or enter your email address in the form below to resend the email.
Please confirm the information below before signing in.
{* #socialRegistrationForm *}
{* firstName *}
{* lastName *}
{* displayName *}
{* emailAddress *}
By clicking "Sign In", you confirm that you accept our terms of service and have read and understand privacy policy.
{* /socialRegistrationForm *}
Almost Done
Please confirm the information below before signing in. Already have an account? Sign In.
Intended for use in harsh environments commonly found in industrial automation, motor control, military, and avionics applications, the devices operate over a temperature range of -40°C to +125°C and allow the connection of up to 128 nodes on the bus.
“Useful information! Thanks guys! nnhttp://dentistcalgarynw.ca”