SOFTWARE TOOLS - Tools for motor control improve performance, reduce design time - Embedded.com

SOFTWARE TOOLS – Tools for motor control improve performance, reduce design time

Chandler, Ariz. – Microchip Technology Inc.is offering two new low-cost development systems, one for the control of high-voltage motors and another for stepper motors.Along with related application notes and free source-code software, these development tools enable rapid designs using dsPIC digital signal controllers (DSCs).

The first of these systems, the dsPICDEM MCHV Development System, is the industry's only development tool for the rapid evaluation and design of a wide variety of high-voltage, closed-loop motor control applications using AC Induction Motors (ACIMs), Brushless DC (BLDC) motors or Permanent Magnet Synchronous Motors (PMSMs).

The board includes in-circuit debugging circuitry, eliminating the need for a separate debugger for development with Microchip's dsPIC33 Motor Control DSC families.Additionally, this tool combines a proven motor-control system and Power Factor Correction (PFC) for regulatory requirements.

The second package, the dsPICDEM MCSM Development Board, is the industry's most cost-effective tool for creating unipolar and bipolar stepper motor applications.This board enables the rapid development of both open-loop and current-closed-loop microstepping routines using Microchip's dsPIC33 Motor Control families.This development tool also provides engineers with a control GUI, which allows them to focus on integrating the other application features and fine-tuning the motor's operation.

Both development boards feature the flexible dsPIC33F 'MC' DSC families, which integrate leading-edge motor control features.

Five royalty- and license-free software application notes with source code are being released for development, five with the dsPICDEM MCHV and one with the dsPICDEM MCSM.Designers can utilize Microchip's optimized code to produce reliable results, while reducing software creation and debug time.'

The five app notes with code are: AN957 Sensored BLDC Motor Control Using dsPIC30F2010; AN984 An Introduction to AC Induction Motor Control Using the dsPIC30F/dsPIC33F DSCs; AN1078 FOC Sensorless PMSM with SMO Estimator, Field Weakening and Dual Shunts; AN1160 Sensorless BLDC Control with Back-EMF Filtering Using a Majority Function; AN1299 FOC Sensorless PMSM with SMO Estimator, Field Weakening and Single-Shunt; and AN1307 Stepper Motor Control with dsPIC DSCs.

Microchip's free Field Oriented Control (FOC) software libraries enable the development of green motor-based systems.By using these libraries, the engineer can run motors at their peak efficiency and generate the maximum torque using the minimum amount of energy.

Microchip's stepper motor control library enables the development of high-speed stepper motor control applications with variable micro-stepping down to 1/64 of a step.By using closed-loop current control, stepper motors can be run several times faster than their rated speeds with high torque and very-low-noise operation.

Included with Microchip's free MPLAB IDE integrated development environment is an application called the Data Monitoring and Control Interface (DMCI).Using this GUI with a USB cable for communications to the target board via the included Real Time Data Monitoring (RTDM) protocol promotes rapid parameter tuning for different motors.

Both tools are available today for purchase from microchipDIRECT.com or any authorized worldwide distributor.The dsPICDEM MCHV Development System (part # DM330023) is $650.The dsPICDEM MCSM Development Board (part # DM330022) is $129.99, and is also available as the dsPICDEM MCSM Development Kit (part # DV330021, $269.99), which includes a stepper motor and 24-volt power supply.

For a complete overview of Microchip's dsPIC DSC motor control solutions, visit www.microchip.com.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.