Toshiba Electronics Europe is offering several new high-speed motor driver ICs that support high voltages and currents. The TB67H400A 2-channel DC brush motor driver and the TB67S10xA series of stepper motor drivers deliver the high speed, voltage and currents demanded by applications such industrial automation, CNC machines, home appliances, ATMs and banknote counters. All of the new drivers have a maximum 50V rating and a low on resistance of 0.5Ω (maximum, sum of the upper and lower side).
The TB67H400A is a 2-channel motor driver IC for brush motors that supports a maximum operating current of 3.0A (4.0A rated) per channel for a 2-channel drive. A parallel channel control function also allows the device to operate as a single-channel driver delivering up to 6.0A (8.0A rated). It is available in four different package types to meet a number of specific customer requirements. Small packages, such as the QFN48 and HTSSOP48 can be used for system downsizing, while continuous operation at high current is addressed by using a high-power dissipation package such as HZIP25. The HSOP package allows flow soldering on a paper phenolic board, which helps to reduce the cost of printed circuit board development.
The TB67S10xA series of stepping motor driver ICs offers low heat-generation at high voltage and high current, making the devices ideal for designs where space is at a premium. Fabricated using the latest high voltage analogue process, the TB67S10xA series incorporates ADMD technology which automatically optimises the drive current, improving switching speed and contributing to lower heat generation and higher drive efficiency.
Built-in abnormality detection functions such as thermal shutdown circuitry, overcurrent shut down circuitry and undervoltage lockout circuits protect the TB67H400A, while built-in abnormality detection flags protect the TB67S109A.